HoodSkulls®

HERO. Pair.

  • Sale
  • Regular price $64.99
Shipping calculated at checkout.


Hero HoodSkulls® are our way of giving something back to the badasses who put their lives on the line to protect our families and freedoms. 

HoodSkulls® let you personalize your rig beyond decals and expensive mods. HoodSkulls® can be bolted onto nearly anything with a hole; bumpers, light bars, CB antenna mounts and cowls. Free badass decal included.

    IMPACT:

    Your support permits us to make contributions to incredible causes. Our favorite causes* are currently:

      • Jon's Mission for 22. 
    • Too many American veterans return to civilian life in need of healing. Mission22 is an incredible resource for information, assistance and programs for our veterans. 
    • Wounded Warrior Project. Click on the Corporate Champion logo below to read more about the Wounded Warrior Project.

     

    PLUGGED: Some designs in our Hero HoodSkulls® family are wire channeled for your pre-wired, 12v 5mm, LED bulbs. The eye sockets on our Hero22® are 'plugged' (see red area in picture), but the 1.5mm thin, visible ‘plug’ can be easily drilled (5/32 bit) through it’s center, giving you access to concealed internal channels for your wires. They are LED-Ready when you are. Click HERE to watch a how-to video on plug removal. 

    MATERIALS WE USE: We use stainless steel bolting hardware and automotive grade rubber gaskets. We prefer and continue our full migration to ASA (acrylic styrene acrylonitrile, widely used in the automotive industry).

    PAINTING: We manufacture in materials that can be easily painted. Painting is not necessary but would add your personal touch and give even more durability to your HoodSkulls®. Mud baths and snow also provide protection, so be sure to apply mud or snow liberally when available! 

    BOLTING ON HOODSKULLS®:

    • IMPORTANT! We ship with a nearly universal fitment kit. However, if you are installing your HoodSkulls® on the cowl of a new (2018+) Jeep, you need our JL/JT fitment kit. You do not need the fitment kit on any other vehicle, whether from Toyota, Honda , Mercedes, Ford, Chevrolet, Ram, Nissan, General Motors, Isuzu, Mitsubishi, Land Rover, Subaru, Hummer, etc. (but you will need a hole to bolt through).
    • HoodSkulls® ship with stainless steel (silver) bolts, and each ships with rubber gaskets to protect the surrounding paint and seal gaps. Stainless steel washers and locknuts are included. 
    • Removal of the boring, OEM Jeep hood bump is simple. The bolting of our HoodSkulls® is just as easy. Our design team listened to hard core Jeepers, so if you ever lower your windshield to fly like an old school pilot, your HoodSkulls® can rest in your glove box along with the removed windshield bolts. ☠️🔥👊🏻😎 
    • Don't rest your heavy windshield on your HoodSkulls® without padding and glass insurance. Our latest versions of HoodSkulls® incorporate a revised, bolt-through installation process that is simultaneously compatible with old and new Jeeps.
    • Please note that a 5mm hex key and 10mm deep socket will be required for installation. Only the hex key is required for installation on a cowl. 
    • If you take your HoodSkulls® through a carwash with heavy mats beating on them, you may damage small details like horns or tiara. Please select a model that best matches your lifestyle, there’s one for everyone! Evaluate for yourself whether and where to install them on your Jeep, or decide to ultimately keep them on your desk.
    • Lost your packing slip? Click here for a copy.
    • If you need a universal hood bracket, the team at our companion web store has links. Click here. Let us know when you place your order that you will be using a universal hood bracket so we can send the correct length bolts.

      💀🌶💀🌶💀🌶💀🌶💀🌶💀🌶

      LED-READY: LED-Ready HoodSkulls® do not include LED bulbs or wires. Adding LED's is a DIY mod project that requires semi-advanced skills. 'LED-Ready' does not mean 'plug-and-play'. If you need installation instructions beyond what we posted on our FAQ page, you should not get the LED-Ready version of HoodSkulls®. We don't provide tech support for LED bulbs or their installation. LED-Ready have built in channels for your wiring, with a clean exit for those wires. Just add your wires and LED 'eyes' (pre-wired 12V, 5mm LED) then connect to relays under your hood and a switch in your cabin. No drilling is required with our LED-Ready HoodSkulls®. There are so many options with LED colors and switches, our DIY fans are having a party with all of the choices. We sell LED-Bulb kits if you need them. Remember to seal gaps around your installed bulbs, and consult your DOT laws about vehicle lighting. Also remember to verify the polarity of your prewired bulbs (black and red are sometimes reversed). Please note that before you install your bulbs, there will be holes in the eye sockets. Please visit our FAQ page and refer to the wiring pictorial links. The installation is generally simple, but diagnosing and repairing a short circuit in your Jeep can be expensive and complicated. Hire a mechanic or electrician. 

      INTERNATIONAL ORDERS, CUSTOMS AND IMPORT TAXES: Customers are responsible for any customs and import taxes that may apply. We are not responsible for delays due to customs, but the wait will be worth it. HoodSkulls® will make your rig grin.

      ADDITIONAL SOURCES OF INFORMATION: Please visit the FAQ section for warranty, material, general information and a smile.

      We love our fans:

      Please read our Terms of Service and Legal Disclaimer. We are not affiliated, associated, authorized, endorsed by, or in any way officially connected with any other company. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

      * The 501(c)(3) charities that we support are Mission22 (formerly Elderheart), Wounded Warrior Project and Jons Mission for 22.


      Customer Reviews

      Based on 6 reviews
      100%
      (6)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      C
      Chuck

      Absolutely love it

      M
      Michael Schutz
      Airborne skull Awsomeness! 82nd Airborne

      From the moment I contacted HoodSkulls with my idea for a custom order, they were awesome! They quickly came up with a image that was perfect!! Turnaround time was quick! Installation was easy and wiring was easy also! Communication with company during process was great also!! Highly recommend these guys when you wanna Jazz up your Jeep!….Thanks guys!!

      T
      Thomas
      HERO USMC

      Awesome company to work with. I contacted them on making the custom USMC Hero hood skulls and they did an excellent job in response and design. Also, they contribute to the Wounded Warrior Project. I have ordered 3 sets. They make a great gift also. Great quality, form, fit, and function. Made in the USA! As they say they're just badass!! Thanks Hoodskulls.
      Semper Fi,
      T.W.
      MGySgt (retired)

      G
      Greg
      Awesome product

      I absolutely love the Hero 22 skulls! I waited impatiently for their release and jumped on them as soon as they went on sale. I have a set of large and small on my JKUR in place of the hood warts and the bar that was there. Only minor modifications were made to allow the wires to pass through the hole for where the bar was. The LED installation was super easy based off the online instructions. I put green LEDs in to match my Jeep and gave them a customized paint job. They turned out so great that I've already ordered another set to go on my Renegade. Best of all, the purchase of the Hero 22 skulls helps out a great cause! Great product from a great company helping a great charity. Doesn't get any better than that. Thanks HoodSkulls team!

      B
      Bill Imholz
      Fire dept HoodSkulls

      So I just recieved the Fire Dept Hoodskulls for my Jeep and immediately installed them. I'm a volunteer Fire Fighter in Middletown, NY and the great team of HoodSkulls provided me an opportunity the have these badass skulls on my rig. They truly have kept me updated every step of the way and answered all silly and ridiculous questions I have asked. You guys are AMAZING!!!! I will post pics as soon as I finish wiring my led lights in them. It got to too dark out to continue.
      Thanks again to the HoodSkulls team!!!!